Citizen PPU-231II Manual de instrucciones descargar pdf (Pagina 31)

— 28 —

Description of Errors

Paper end:

When the paper roll has run out, the Paper end sensor located in the paper path

near the print head detects the end of the paper roll, causing the PE to be output

and the printing to stop. (See “Selecting the paper sensor valid for paper end

signal output” and “Selecting the Paper Near-End sensor valid for print stop” in

Print Control Functions.)

Paper near-end:

When the paper roll diameter is reduced to the lower limit, the Paper near-end

sensor is activated and causes the PE to be output, indicating that the paper supply

has become low. (See “Selecting the paper sensor valid for paper end signal

output” and “Selecting the Paper Near-End sensor valid for print stop” in Print

Control Functions.)

Head up:

When the head up lever is raised, the head up sensor is activated, causing ERROR

to be output and the printing to stop.

Head overheat:

To protect the print head from overheating, the head temperature sensor is

activated if the head temperature rises over approx. 65°C, causing ERROR to be

output and the printing to stop. Printing resumes automatically when the head

temperature lowers below 60°C.

Cutter motor lock:

While the cutter motor is running, if the cutter position sensor inside the cutter unit

keeps ON or OFF for approx. 1 second or more, the printer judges that the motor

has locked, causing the cutter operation and printing operation to stop. (See “4.7

Removing Cutter Lock”.)

Low voltage error:

This error occurs when the voltage supplied to the printer is too low. If this error

occurs, turn the printer power off immediately.

High voltage error:

This error occurs when the voltage supplied to the printer is too high. If this error

occurs, turn the printer power off immediately.

Presenter error:

This error occurs when the presenter cannot eject paper or it cannot collect the

ejected paper. To clear this error, press the FEED switch.

Black mark detection error:

This error occurs when the printer cannot detect the black mark. If this error

occurs, turn the printer power off and confirm the paper and DIP switch setting.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 74 75

Sin comentarios

Citizen PPU-231II Manual de instrucciones Pagina 31